Water Damage, Mold, and Mildew

One of the worst mistakes that a homeowner can make is ignoring the possibility of water damage to their home. While it may not seem like the steam in your bathroom from your showers or baths can do a lot of damage to the room, over time it can discolor the ceiling and eventually cause the drywall to sag down and possibly even collapse. You can imagine what kind of damage to the value of your home this can do and if you have purchased a home with water damage to the floors or ceiling, you know how much of a headache it can be to remodel it.

The answer to the steam problem is to install a simple exhaust vent in the ceiling over the tub or shower. This allows the steam to escape outside the room and the house and stops it from being absorbed by your ceiling drywall. You can often paint over the discoloration of the drywall after it has been damaged, but if the slab is sagging or cracked in the middle, it needs to be replaced as soon as possible. The last thing you want is for a loved one to be in the bath and the ceiling collapse on them.

Mold is also a threat to this and other moist rooms in the house. Mildew also tends to build up on tile and stone. Mildew and mold are close to the same thing, since they are both fungi, but mold tends to grow on more porous surfaces.

We have all heard horror stories of the bath tub or the toilet falling through the floor and unfortunately, most of the time this is due to the floor boards rotting. Too much water has soaked the floor over the years and has caused the boards to become flimsy. You can prevent this by making sure the floor of your bathroom is a hard, non-porous surface such as tile. The floor should be completely water tight and you may want to even install a drain on the bathroom floor, just to make sure the water goes where it is supposed to.

Even if you have a watertight floor, keeping the bathroom as dry as possible is a good idea. Always dry off the floor and other surfaces in the room after you get done with your shower. This helps lower the humidity in the room and ensures that the person who comes in the room after you does not slip and fall.


Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.localrestoration.com and
http://www.moldrestorationusa.com

Venting Is a Good Thing to prevent mold

If you do not have a ceiling exhaust fan installed in your bathrooms, it will not be long before you realize why you need one. There are so many reasons that they are a necessary item. Have you ever tried to blow dry your hair in a steamy bathroom? If you could see yourself in the mirror it might help, but with all that moisture in the air it’s not likely. Then there are also those unspeakable bathroom odors that almost anyone would rather not speak of, but they go along with the natural procession of things and the exhaust fan is a marvelous invention, if only to dispel an unpleasantness that remains even after its last occupant is gone!

A bad hair-do will be the least of your worries if the moisture problem is not corrected. A consistently steamy bathroom can result in shrinking the edges of wallpaper and peeling paint. These minor complications are bad enough in themselves, but with prolonged exposure, it can actually cause wooden window frames to swell, preventing them from opening easily, or not at all. Other wood, such as door frames, crown molding, and baseboards can swell and be damaged also, and then there is the scary mold that can grow on the ceiling and walls. It can be much cheaper in the long run to install exhaust fans rather than wait around for more costly repairs to show up later. Rest assured, any unresolved water problems in a home will not result in any thing good.

The exhaust fan is something that is rarely overlooked in newer homes, but not so in older ones. If you are a do it yourselfer, this could be a project you can handle. However, it does involve some electrical wiring, cutting holes through your ceiling and possibly through your outer wall in the attic. Home improvement stores have them with or without lights. If there is any existing light fixture in the ceiling of your bathroom, it is an advantage. If not, it will be a little more involved. In any case, if you are not familiar with electrical wiring and reciprocating saws, then hiring someone to install it for you might be the easiest and safest option. Saving money doing it yourself is great if your work is done properly. Just remember it is only home improvement if you are fixing old problems and not creating new ones!

Jim Corkern is a writer and promoter of quality
water damage restoration companies and
mold remediation companies across the united states.

House Renovating Woes

Buying a new house can be a headache all by itself, but if you are wanting to purchase a fixer upper, then you have a lot more on your plate than most people do. House flipping is a popular way to make some quick money, but it is not usually as easy as television shows and magazines make it out to be. It is not only difficult because of the construction costs, but also because of the physical and emotional strength you have to have to get through the process. Carrying the loan or loans that you may have to get to be able to afford the property is something else. If you are unmarried and already have an apartment or mortgage to pay for, then carrying another mortgage until the home is fixed up and finally sold can be a little scary.

One thing that you need to be careful about if you are planning on renovating on a budget is taking on tasks that you have no experience in. You may be able to paint the interior on your own, but cutting your new granite countertops may be something you want to leave to the professionals. This can be very complicated and can most of the time only be done once. Mess up the granite slab and you will have to buy another to replace it and this can punch a huge hole in your budget. When in doubt, leave something to the professionals and do not cut corners by taking on projects you are not sure that you can do to professional quality.

Always check for water and mold damage to the property before signing any papers. You want to know just what you are getting yourself into and these two problems cropping up in the middle of your renovation can sink you further into debt than you intended to go. Repairing these problems can sometimes cost thousands of dollars and most of the time, mold cannot be gotten rid of without removing all of the building materials affected by it. It can be scrubbed off of drywall sometimes, but if the growth is heavy on the surface, you should throw it away instead. Cleaners cannot get into the porous drywall far enough to completely kill it and it will return.

The most moist areas of the home are often the most likely to be structurally damaged and there have been many stories of toilets and bath tubs falling through the floor due to rotted supports. This is usually because the floor has been soaked with water on a regular basis for a long time and unfortunately, this can be a real pain. If you are remodeling the floor with new tile, you may want to go ahead and check for this kind of damage underneath it, just to be sure you do not have to go back and do all this again.

Jim Corkern is a writer and promoter of quality
water damage restoration and
mold remediation companies across the united states.

Getting Rid of the Mold

Even if you manage to kill the mold that exists in your house, your job is not over. When people discover there is mold in their homes, the first thing they usually want to know is the best way to kill it. This is the wrong way to approach the problem, because even though the mold is dead, it can still cause you health problems. The spores cannot cause yeast infections because they are dead and can no longer grow, but your body still recognizes them as something to be fought against, so you will experience allergy symptoms or even sometimes severe reactions to them. About one third of the population has mold allergies of some kind, so this is something that you want to consider.

Most of the time, removing the mold from the property completely is the only way to get rid of the allergy symptoms you or your loved ones may experience. This will probably mean opening up walls and removing drywall or even sometimes lumber from the home and replacing them with new material. You can sometimes wash mold off of the surface of drywall slabs, but if the growth is thick and heavily covers the surface, then it may be embedded into it and removal will be necessary. Mold killing chemicals cannot penetrate far enough into the drywall to kill the contamination and so it will only return, no matter how much scrubbing you do.

You can save clothes that have become molded sometimes, but unfortunately clothes that have been left molded for a long period of time can be so stained that it can never be taken out. Outside in the natural environment, the job of mold is to help with the decomposition of organic materials and it tends to do this fairly well, which is why you need to worry about it in your house. Lumber is organic, of course, and certain kinds of mold will cause it to rot completely.

Regularly check your house for water damage. If there is water damage, you can be sure that mold will start to grow there eventually if it is not taken care of. Moist areas in the home are the most at risk for mold growth and if you do not take care of them, you may end up having to do some heavy remodeling in the future to take care of the problem.


Jim Corkern is a writer and promoter of quality
Connecticut Mold Remediation services and
flood and water damage cleanup companies across the united states.

Exhaust Fans Help Prevent Bathroom Mold

If you live in an older home or are thinking about buying one, there may not be exhaust fans in the bathrooms. Installing them will probably be in your best interest for quit a few reasons. First of all they help to pull those smelly odors out of the room. Next they stop your mirrors from fogging up so much, but more importantly they go along way towards the prevention of mold growth. All that moisture will eventually lead to the black fuzzy looking stuff setting up housekeeping on your bathroom walls and ceiling. Excessive moisture can damage to your paint or wallpaper and woodwork as well. If left unresolved it can damage sheetrock and cause extensive repairs to have to be made. Mold growing anywhere can be unsightly and not a very healthy situation either.

Installing an exhaust fan now can be a fairly inexpensive solution when compared to the costly consequences of putting it off until later. You can get them at most home improvement stores. They can be purchased with or without lights. If you have a ceiling light fixture in your bathroom already, you can replace it with a fan/light combination. Or add just the fan in another location. Before you go down to pick one out, be sure to know the measurements of your bathroom so you are able to purchase one that will be strong enough for the size of your room. A sales person should be able to help you locate one with the right CFM {cubic feet per minute} That information can be found somewhere on the box..

If your going to attempt the installation yourself, take a good look at the tools you will need and all the necessary steps involved to be sure that you are up to the task. There are several things such as electrical wiring, installing the vent into the ceiling and out of the house through the attic. You might want to consider hiring someone to do it for you. Sometimes this is the best way to go if your not very skilled at do it yourself projects.

Whichever way you decide to go, it will be an inexpensive improvement that will help to dispel a number of things excessive bathroom moisture can cause. It will defiantly be worth the time and money now compared with what it could cost you least on.

Jim Corkern is a writer and promoter of quality
damage restoration companies and
mold removal companies across the united states.

Easy Water Damage Prevention

Whether you’re a home owner or renter, live in a new place or old one, no one ever wants to deal with major water damage. It can be difficult to clean up and costly to repair. Mother nature can always throw some curves that only a good insurance policy can cure, but there are a lot of things you can do to prevent small things from becoming major problems.

A solution to major avoidable water damage in the future can be to make a check list for your home today. Start in the bathrooms. Check the shut off valve under your toilet. Make sure there are no leaks there or any dampness around the base where it sits on the floor. If there is, this could mean the seal inside is leaking and probably needs to be replaced.. It is not really difficult, but it has to be reset on the new seal correctly to prevent new leakage. Check anywhere under the sink for the same kind of leaks. The tub and shower pipes and fixtures should be next. If there are signs of water stains on the walls or floors, the problem should be addressed immediately. Putting off fixing these problems can lead to rotting floors, wall studs and mold in the sheetrock.

Of coarse the kitchen is a source of water problems. The same procedures can be repeated there under the sink. Your refrigerator can leak also. Check underneath for water, bumps in the floor or loose tiles. Check the water supply line if you have an ice and water dispenser on your fridge.

There are other places that are just as important as the kitchen and bathrooms. Hot water heaters are seldom thought of unless you get no hot water when you turn on the spigot. They can leak around the fittings and older ones can rust through the bottom.

The laundry room if you have one has potential too. You can get leaks from the water supply feeding to the washer or from the washer itself. If you have ever had a washing machine flood you never want to have another one!

Last but not least are the outside sources. Your roof should be checked for leaks outside and in your attic. Especially after strong storms and or high winds. Outside water spigots are common leaking things that you should keep an eye on. Checking under the house and any pipes in the basement if you have one, is just good sense. Save time and money down the road by utilizing a good check list for all the water sources in your home.

Jim Corkern is a writer and respected contributor to the Water damage restoration and mold remediation Industry. Visit his sites for more information.
http://www.waterbasementct.info and
http://www.moldrestorationusa.com